WHO IS THIS KIT FOR? - Ideal for larger or more complex campervan and motorhome hot and cold water systems, providing a wider range of John Guest 12mm connectors for multiple outlets and more extensive plumbing layouts.
 
Build a complete hot and cold campervan water system for a kitchen sink, internal shower and water heater using John Guest 12mm plumbing.
 
The Advanced Hot & Cold Water Connector Kit brings together the pipe, isolation valves and push-fit fittings needed to create a larger pressurised campervan water system without sourcing every component individually.
 
Designed for installations with one kitchen sink, one shower and one hot water heater, with selectable connections for each appliance.
 
💧 WHY WE USE THIS KIT
Adding a shower to a campervan water system means more pipe runs, branches, valves and fittings.
 
This kit provides the core components for a practical hot and cold installation, with additional isolation and enough fittings for routing pipework throughout the vehicle.
 
✅ SUITABLE FOR
• Campervans and motorhomes
• Kitchen sink with hot & cold water
• Internal shower installations
• Systems with one hot water heater
• 12mm John Guest plumbing systems
• Existing pump and accumulator setups
• Larger DIY water system installations
 
📦 WHAT'S INCLUDED
• 8m John Guest 12mm Cold Water Pipe
• 6m John Guest 12mm Hot Water Pipe
• 6× John Guest 12mm Isolation Valves
• 4× 12mm Push-Fit × ½″ BSP Female Adapters
• 3× John Guest 12mm Equal Tees
• 8× John Guest 12mm Equal Elbows
• 45× 12mm Pipe Inserts
• 45× Locking Clips
• 20× 12mm Pipe Clamps
 
🔧 CHOOSE YOUR SINK CONNECTION
• 2× 12mm × ½″ BSP Male Adapters
• 2× 12mm × ⅜″ BSP Male Adapters
• Not Required
 
🚿 CHOOSE YOUR SHOWER CONNECTION
• 2× 12mm × ½″ BSP Male Adapters
• 2× 12mm × ⅜″ BSP Male Adapters
• Not Required
 
🔥 CHOOSE YOUR WATER HEATER CONNECTION
• 2× 12mm × ½″ BSP Male Adapters
• 2× 12mm × ⅜″ BSP Male Adapters
• Not Required
 
NEED A DIFFERENT CONNECTION?
Water heaters, taps and shower fittings can use different connection types. If your installation requires a fitting not shown in the available options, contact us at info@vanlifecrafters.com before ordering and we'll help identify the correct connection.
 
⚠️ IMPORTANT NOTES
• Pump, filter, accumulator, water tank, sink/tap, shower and water heater are not included
• Tank connection fittings are not included, as tank outlet sizes vary
• Designed for John Guest 12mm push-fit plumbing
• Diagram shown is an example layout only; actual pipe routing and fitting requirements will vary between installations
• Always verify the connection sizes of your equipment before ordering